Best Pulley Squat Racks: SPORTSROYALS Leads

The best with pulley squat rack for home gyms is the SPORTSROYALS RK2, a 150 lb power cage that packs a lat tower, dip bars and 13 included pieces into a 61.6 x 56 x 82.6 in frame. If you want cable crossovers rather than a single lat station, the GOIMU DP01 and its dual independent pulleys is the better buy. Price tiers here split cleanly: the entry end gets you a narrow cage or a bolt-on pulley kit, the middle buys a full-depth cage with a lat tower, and the top of the set buys a second cable stack and a longer warranty. That's the whole map.

Best with pulley squat rack for home gyms at a glance

Why three picks were cut before the shortlist closed

Three things knocked listings out of this comparison before I ranked anything.

First, no published cage dimensions. A rack you can't measure against your ceiling is a rack you can't buy, and every survivor here publishes a full length, width and height. Second, a pulley bolted on as an afterthought with no stated adjustment range. Third, a cage frame with no accessory count and no warranty statement, which leaves you guessing at both what arrives in the box and what happens when a pulley seizes.

What survived is a set of four cages plus one attachment kit. All four cages state a steel gauge or a load figure. Three of the four publish a warranty term. Every one of them names a pulley system in the listing rather than leaving it to the photos.

One note on the search itself. "Home gyms" is a soft qualifier here, not a specification any of these products carries. None of these listings publishes a ceiling-height minimum, a noise figure, or a floor-loading rating, so I've treated the phrase as a set of questions you have to answer about your own room. Height, depth, and whether the frame needs bolting down are all on you.

1. SPORTSROYALS Squat Rack — Best overall

A 150 lb cage with a two-position lat tower and 13 included pieces, at a footprint most single-car garages can absorb.

Best for: a garage lifter who wants storage and a lat tower in one frame Skip it if: your ceiling is under 7 feet

What sets the RK2 apart in this set is the count: 13 pieces. That's the highest here by a wide margin, and it's the number that decides whether you're done buying or you're back on Amazon next week for a tricep rope. SPORTSROYALS says the frame uses 50 x 50mm commercial steel at 1.5mm wall thickness, with a published rating of 1200 lb and an upper and lower pull-down pulley system. The listing also claims 14 height-adjustable pillars and integrated storage: one barbell holder, six weight pegs, six handle hooks.

The physical numbers matter more than the marketing. At 61.6 x 56 x 82.6 in, this is the shortest cage of the four at 82.6 in tall, which gives you slightly more clearance under a low garage ceiling than the 84.3 in GOIMU. The shipping weight is 150 lb, the only weight figure published across the four cages, and it tells you two things: you'll want a second pair of hands, and the frame has real mass behind it.

The trade-off against the rest of this set is the load rating. 1200 lb is the lowest published figure of the four cages, where GOIMU and JELENS both claim 2000 lb. For anyone squatting under 400 lb that gap is academic. The one-year warranty also trails the two-year terms on the GOIMU and ULTRA FUEGO.

Pros:

• 13 included pieces, the highest count in this set
• Shortest cage height at 82.6 in
• Upper and lower pulley positions, not just a lat tower
• Integrated storage for a bar, six plates, six handles
• Published 150 lb frame weight

Cons:

• 1200 lb rating is the lowest of the four cages
• One-year warranty against two years elsewhere
• Only one seller lists it
• 56 in width eats real floor space

2. GOIMU DP01 Power Cage — Best premium

Two independent cable stacks and a two-year warranty, at the highest price position in this set.

Best for: someone who wants cable crossovers, not just a lat pulldown Skip it if: you need the shallowest possible footprint

The DP01 is the only pick here with dual independent pulleys. That's the whole argument. A single lat tower gives you pulldowns and pushdowns; two independent stacks give you crossovers, single-arm work and unilateral pressing without re-rigging anything between sets. GOIMU claims a 2:1 cable ratio for smoother motion and 31+29 height positions across the two systems, which is the finest published adjustment range in this comparison.

The construction claims are 2" x 2" steel tubing and a 2000 lb rating, tying JELENS for the highest figure here. The two-year warranty matches ULTRA FUEGO and doubles what SPORTSROYALS and JELENS publish. At 84.3 x 57.9 x 46.5 in this is the tallest frame in the set, and the 84.3 in figure is the one to check first: that's just over 7 feet before you add a floor mat.

Where it loses ground is transparency and bulk. The listing publishes no frame weight and no accessory count beyond a general claim of "more training attachments", so you can't compare what arrives in the box against the RK2's stated 13 pieces. At 57.9 in wide it's also the widest here. This is the most expensive pick in the set, and the extra outlay buys the second cable stack rather than a better cage.

Pros:

• Only pick with dual independent pulleys
• 31+29 published height positions
• Two-year warranty
• 2000 lb claimed rating, highest in this set
• 2:1 cable ratio claim for smoother pulls

Cons:

• Tallest frame at 84.3 in, tight under a 7 ft ceiling
• No published accessory count or frame weight
• Widest footprint at 57.9 in
• Highest price position with no published storage features

3. JELENS S11 Power Cage — Best for families

A 2000 lb claimed rating on a frame JELENS says covers only 12.5 square feet, which makes it the easiest of the full-depth cages to plan a room around.

Best for: a shared rack where two people swap heights constantly Skip it if: you want more than a one-year warranty

The S11 is the only pick in this set that publishes its floor area directly: JELENS states 12.5 square feet, with an inner cage of 57.5 in long by 44.5 in wide by 79.7 in high. That's the number you actually chalk onto a garage floor. Overall dimensions run 82.6 x 57.5 x 44.5 in, which makes it the shallowest of the three full-depth cages at 44.5 in.

I picked this for shared households because of the pulley layout combined with the price position. JELENS describes an up-and-down pull-down system, so a taller lifter can pull from the high position while someone shorter works cables at the low anchor, and 50mm x 50mm steel with a 2000 lb claimed rating means neither of them is near the limit. It's roughly mid-range for this set, and it sells at a middling pace here, faster than the ULTRA FUEGO but slower than the two premium cages.

The weaknesses are real. The one-year warranty is the shortest term published among the cages, matching SPORTSROYALS. There's no published frame weight, no stated accessory count, and no listed colour choice beyond black. Against the GOIMU it gives up the second cable stack entirely, and against the RK2 it gives up the itemised storage.

Pros:

• Publishes its own footprint at 12.5 sq ft
• 2000 lb claimed rating on 50mm steel
• Shallowest of the three full-depth cages at 44.5 in
• High and low pulley anchors for mixed-height users

Cons:

• One-year warranty, shortest in the set
• No published frame weight or piece count
• "Full set of accessories" never itemised
• Only one seller lists it

4. ULTRA FUEGO Power Cage with Pulley System — Best for heavy use

A 29.5 in deep frame in commercial-grade laser-cut steel with a two-year warranty, for rooms where depth is the constraint.

Best for: a narrow garage bay or basement alcove Skip it if: you want deep inside-the-cage working room

At 80.7 x 29.5 x 46.9 in this is the outlier of the group, and the 29.5 in depth is why. That's roughly two thirds the depth of the JELENS and less than half the footprint area of the wider cages. It also means you're working in a shallow frame rather than a full cage, so plan your bench position carefully before you load a bar.

ULTRA FUEGO publishes 50 x 50 x 1.5mm laser-cut powder-coated steel, matching the SPORTSROYALS gauge, plus a two-year manufacturer warranty. The adjustment detail is the most specific in this set: 10 height levels for the J-hooks and safety bars, 3 levels for the dip handles, on 4 inch hole spacing. Four-inch spacing is coarse for bench pressing, so check your press height against it. The listing claims 10+ accessories and a smooth cable pulley system with no separate cable machine required, and it's the second-cheapest here.

Two honest problems. It's the slowest seller of the five, well behind the rest. And the cable setup is a single pulley system where three rivals publish high and low anchors or two independent stacks, so cable variety is the thing you give up for the narrow frame and the low price.

Pros:

• Shallowest cage in the set at 29.5 in
• Two-year manufacturer warranty
• 50 x 50 x 1.5mm laser-cut steel
• 10 J-hook levels, 3 dip handle levels published
• Second-cheapest pick here

Cons:

• 4 inch hole spacing is coarse for bench work
• Single pulley system, no low anchor published
• Slowest seller of the five
• No published load rating or frame weight

5. SERTT Weight Cable Pulley System — Best budget pick

A 9.83 lb two-pulley kit that turns a rack you already own into a cable station, and the cheapest way into this category by a distance.

Best for: adding cable work to a rack you already own Skip it if: you don't already have a rack or beam to hang it from

This is the one pick that isn't a rack, and it belongs here because plenty of people searching for a pulley squat rack already own the squat rack. The SERTT kit ships at 9.83 lb in a 4.3 x 15.2 x 6.5 in box with two pulleys, which SERTT says is more than competing sets include, plus handles and cable accessories for lat pulldowns, curls and pushdowns. It's the cheapest of the five and it sells at a healthy clip here, second only to the two premium cages.

The mounting claim is the useful part: SERTT says it connects to power racks, squat racks, pull-up bars, beams, and anywhere a strap can wrap. That flexibility is the entire value proposition. You supply the anchor and the weight; the kit supplies the redirect and the handles.

Now the limits, and they're substantial. It has no frame, no uprights, no safeties and no J-hooks, so it cannot replace any of the four cages above. There's no published load rating, no warranty term, and no stated cable length, which means you're guessing at both the ceiling on weight and how far a pulldown will travel. And whatever you bolt it to has to be rated for the load you hang from it. Check that before you clip a plate on.

Pros:

• Cheapest pick in the set
• Two pulleys, more than typical kits per the listing
• Light at 9.83 lb, small 15.2 in box
• Mounts to racks, beams and pull-up bars

Cons:

• Not a rack: no uprights, safeties or J-hooks
• No published load rating or warranty
• No stated cable length
• Needs an existing structure rated for the load

Will a pulley squat rack fit your ceiling and your floor?

Height kills more of these purchases than anything else. Measure before you shop, in this order.

1. Ceiling height, at the lowest point. Garage doors, light fixtures and beams all intrude. The frames here run 80.7 in, 82.6 in, 82.6 in and 84.3 in. Add an inch for a rubber mat.
2. Standing pull-up clearance. You need headroom above the top bar, not just clearance for the frame itself.
3. Depth, front to back. 29.5 in on the ULTRA FUEGO, 44.5 in on the JELENS, 46.5 in on the GOIMU, 56 in on the SPORTSROYALS.
4. Width plus plate clearance. The widest frame here is 57.9 in, and a loaded bar extends well past that on both sides.
5. Walk-around space. Leave room to load plates and to bail out of a squat.

The JELENS is the only pick that publishes total floor area, at 12.5 square feet, which makes it the simplest to sanity-check against a tape measure. Nothing in these listings states a floor-loading requirement or a minimum ceiling, so treat those figures as the raw numbers and add your own margin.

What more money buys in a pulley squat rack

Across this set the price positions map to capability fairly cleanly, and the jumps are worth knowing before you pick a tier.

The cheapest rung is the SERTT kit. That buys you two pulleys and handles, nothing structural. The next rung up is the ULTRA FUEGO: a real cage with 50 x 50 x 1.5mm steel, a two-year warranty and a single pulley, on a 29.5 in deep frame. In the middle sits the JELENS with a 2000 lb claimed rating, a full 44.5 in depth and high-plus-low pulley anchors.

The top two are where it gets interesting. The SPORTSROYALS costs more than the JELENS and gives back load rating, dropping to a claimed 1200 lb, but hands you 13 included pieces and itemised storage for a bar, six plates and six handles. The GOIMU sits at the top and spends the whole increment on the second cable stack plus a two-year warranty.

So the question isn't "how much rack can I afford". It's whether you'd rather pay for accessories, for cable stacks, or for depth. All three cost about the same here.

Single stack or dual pulley: which cable setup wins?

This is the criterion most guides skip, and it decides more about your training than steel gauge does.

A single pulley system, like the ULTRA FUEGO's, handles the basics. You pull down, you push down, you row. A high-plus-low arrangement, which SPORTSROYALS and JELENS both publish, adds low-anchor work: curls, face pulls from below, cable rows without improvising. That's a genuine expansion, and it's why those two sit above the single-pulley cage in this ranking despite the ULTRA FUEGO's longer warranty.

Dual independent pulleys are a different category again. GOIMU claims two separate stacks with a 2:1 ratio and 31+29 height positions, which unlocks crossovers and true unilateral work where the two sides move independently. If cable work is half your programme, that's the pick.

Here's the trick with pulley ratios: a 2:1 setup moves the handle twice as far as the weight, so the load you feel is roughly half the plate load. Plan your plate purchases around that, not around the number on the sticker.

What these listings don't tell you about assembly

Most shoppers miss this part until the pallet arrives.

Frame weight is published for exactly one pick. The SPORTSROYALS lists 150 lb. The GOIMU, JELENS and ULTRA FUEGO publish no weight figure at all, so budget for a two-person build on any of them.

No listing states an assembly time or a tool list. None of the four cages publishes bolt counts, hardware specifications or whether tools are included.

Bolting down isn't addressed. No pick here states whether floor anchoring is required or optional. For a shallow 29.5 in frame like the ULTRA FUEGO that's worth asking before you load heavy.

Accessory counts vary in specificity. SPORTSROYALS says 13 pieces. ULTRA FUEGO says 10+. GOIMU and JELENS describe "more training attachments" and "a full set" without a number. If knowing exactly what's in the box matters to you, that difference is the whole story.

Only one seller lists each of these five products. That's worth knowing if you plan to compare fulfilment options.

The verdict

The SPORTSROYALS RK2 is the best with pulley squat rack for home gyms because it settles the two questions that actually stall a garage build: what's in the box, and will it clear the ceiling. Thirteen pieces is the highest count published in this set, the 82.6 in height is second-lowest, and the itemised storage for a bar, six plates and six handles means the rack absorbs your clutter instead of adding to it. The 1200 lb claimed rating is the lowest of the four cages, and for the overwhelming majority of home lifters that ceiling will never come into view.

Two conditions flip it. If cable work is a real part of your programme rather than an add-on, the GOIMU DP01 and its dual independent pulleys with 31+29 height positions is the better rack, and its two-year warranty doubles the RK2's term. If your room is narrow before it's short, the ULTRA FUEGO's 29.5 in depth fits where nothing else here will, and it carries a two-year warranty at the second-cheapest price position.

And if you already own a cage, buy the SERTT kit instead. Two pulleys at 9.83 lb is a far cheaper route to cable work than replacing a rack that already does its job.

FAQ

Is a pulley squat rack worth it over a plain power cage?

A pulley squat rack is worth it if you'd otherwise buy a separate cable machine, because you're paying for one footprint instead of two. The lat tower adds pulldowns, pushdowns and rows to a frame you already need for squats and presses. If you only ever barbell train, a plain cage costs less and leaves more room.

What's the cheapest way into a pulley squat rack setup?

The cheapest way into this setup is the SERTT kit, the lowest price position in this comparison at 9.83 lb, provided you already own a rack, beam or pull-up bar to anchor it to. If you don't, the ULTRA FUEGO cage is the second-cheapest pick here and includes both the frame and a pulley system in one purchase.

How much ceiling height does a pulley squat rack need?

Ceiling height for a pulley squat rack starts with the frame itself: these run 80.7 in, 82.6 in, 82.6 in and 84.3 in. Add a mat and pull-up clearance above the top bar. None of these listings publishes a minimum room height, so measure your lowest obstruction, whether that's a garage door track or a light fitting, and compare directly.

SPORTSROYALS RK2 or GOIMU DP01: which should I buy?

Choose the SPORTSROYALS RK2 if you want the most included equipment, 13 pieces, plus integrated storage and a shorter 82.6 in frame. Choose the GOIMU DP01 if cable training drives your programme: it's the only pick with dual independent pulleys, claims 31+29 height positions and a 2000 lb rating, and carries a two-year warranty.

What mistake do first-time buyers make with these racks?

The mistake first-time buyers make is comparing load ratings instead of measuring the room. A 2000 lb claim is irrelevant if the 84.3 in frame won't stand up under your garage door. Check ceiling height, depth and plate clearance first, then compare pulley layouts, then look at the load figure last. It's almost never the binding constraint at home.

Measure your lowest ceiling point tonight, write the number down, and compare it against the four frame heights in the table above. That one figure eliminates most of your shortlist in about a minute. If the SPORTSROYALS RK2 clears it, that's where I'd start: 13 included pieces means the rack you unbox is the rack you keep using, without a follow-up order for handles and a rope. The others each win a specific room or a specific programme. This one wins the common case, which is a garage, a barbell, and a plan to add cables without adding a second machine.

Last updated: September 20, 2026. Product availability re-checked.

This page contains affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.